DFC-0720型增壓養護釜是嚴格按(API)標準規范10設計制造的。用于油井水泥強度試驗的試塊在高溫、高壓條件下養護工作。 INTRODUCTION 一 DFC-0720 Pressurized Curing Chamber is specifically designed to cure standard cube samples for compressive strength testing in accordance with API Specification 10 standards for oilfield cements under both high temperature and high pressure condition .
儀器結構
1、采用英國歐陸3504溫控器，控溫精度高。
2、美國原裝AZ氣驅增壓泵和自行設計的泄壓泵構成壓力控制系統。
3、進口高壓閥門，接頭，三通、管線。
4、世界自壓密封釜蓋，實現無扳手拆卸，極為方便。此項技術已經獲得實用新型。
5、內加熱，外冷卻的結構，延長加熱器壽命，節省能源。
6、電動起吊裝置。
7、國家發明： 油井水泥高溫高壓養護釜釜蓋密封裝置（ZL .5）
STRUCTURAL FEATURES
1. Programmable Temperature Controller made in UK can be accurately controlled.
2. The pressure control system is consist of import air-drive hydraulic pump made in the USA and independent developed pressure release pump.
3.Import high pressure valve, joint, 3-way joint, high pressure pipeline.
4.The world's first pressure self-sealing cover, without wrench remove, very convenient.
5. The structure of heating inside, cooling outside make sure the high quality of heater for long life service and save energy.
6. Electric hoisting device.
7. New national patents (ZL.5) Oil-cement high temperature and high pressure curing chamber, self-sealing cover device.
儀器的主要技術參數
1、電源：AC220V（±10 %）50HZ 5.2W
2、空氣源壓力：0.3～0.7Mpa
3、水源：0.1-0.4Mpa
4、工作壓力：40Mpa，工作溫度375℃
5、多段程序自動控制溫度
6、溫度控制精度<±1℃，壓力控制精度<±1MPa
7、壓力控制方式：進口氣動液壓泵、泄壓泵與進口壓力傳感器及電子壓力控制器結合，實現高精度壓力控制
8、養護量： 8聯試模
9、體積：84×74×189 cm
10、重量：300kg
SPECIFICATIONS
1.Power : AC 220V(±10%) 50Hz
2. Air supply : 0.3~0.7MPa
3. Water supply : 0.1-0.4MPa
4. Max Pressure : 40 MPa, Max Temperature:375℃
5. Automatic multi-segment program control
6. Temperature precision : ＜±1℃, Pressure precision: ＜±1MPa
7. Pressure control mode : Import air-drive hydraulic pump , pressure release pump , import pressure senor and import electronic pressure controller , to achieve accurately control.
8. Curing quantity : 8 row molds
9. Volume ：84×74×189cm
10. Weight : 300 kg
|
|
|
|
|
|
*您想獲取產品的資料：
個人信息：
